Environmentally Friendly Insulation Removal in Barnstaple, Devon means taking out failed spray foam without wrecking your loft, your timber or your air quality. We handle open cell and closed cell foam, keep dust contained with air scrubbers and negative air machines, and separate waste for recycling wherever we can. If a surveyor has flagged foam in your roof, or you are buying a house in Barnstaple with an insulation problem, we can get it sorted.
Environmentally Friendly Insulation Removal in Barnstaple, Devon is a controlled extraction process that takes failed or unwanted spray foam out of a roof, loft or cavity without spreading dust, spores or chemical residue through the rest of the building. We start with a thermal imaging camera and moisture meter survey, then cut the foam back with a spray foam removal saw or oscillating multi-tool, bag it, and run air scrubbers the whole time. Foam is separated for recycling where the waste stream allows, and timber is left clean enough for a surveyor to inspect.
Most Barnstaple jobs we see come from one of three places: a mortgage lender refusing to lend on a property with spray foam in the roof, roof timber rot hiding behind foam that has trapped moisture, or insulation performance loss after years of condensation. Older North Devon properties with slate roofs and breathable timber frames are especially vulnerable. If you have been searching for eco friendly insulation removal near me Barnstaple, we cover the whole town and the surrounding villages, and we can usually survey within a few days of your call.
Every environmentally friendly insulation removal job in Barnstaple includes the survey, the extraction, the timber clean-up and the paperwork. Here is what is covered as standard, and what we can add on if you need it.
Thermal imaging camera and moisture meter survey of the roof void before we quote. We identify foam type, coverage, timber condition and any damp zones. You get a written fixed price the same day.
Air scrubber and negative air machine running throughout, sealed work area, full PPE. We cut foam with a spray foam removal saw or oscillating multi-tool and bag it on site.
Dry ice blasting or sand blasting equipment used to clear foam residue from rafters and sarking. This is the stage that gets a roof past a surveyor's inspection.
Foam and timber separated on site and taken to a licensed transfer station. You receive waste transfer notes and before and after photos with every job.
Written statement that the roof void is clear, with moisture readings and photos. This is the document mortgage lenders and valuers in Barnstaple ask for.
We visit, inspect the foam with a thermal imaging camera and moisture meter, and check the roof structure. You get a fixed written quote the same day, with no hidden extras. Surveys take 45 to 60 minutes and we can usually book you in within three to five working days.
On the day, we lay dust sheets, seal the loft hatch and any gaps with polythene, and set up the negative air machine and air scrubber. We mask vents and pipework. This stage takes 60 to 90 minutes and is the reason dust stays in the loft and not in your kitchen.
We cut the foam with a spray foam removal saw or oscillating multi-tool, working in sections so the timber does not get overloaded. Open cell foam comes out faster than closed cell. A typical 40 square metre loft takes one to two days; a full roof with closed cell foam can take three to four days.
Once the bulk is out, we use dry ice blasting or sand blasting equipment to clear residue from the rafters and sarking. This is the stage that makes the difference between a roof a surveyor will pass and one they will not. Clean-up usually adds half a day to a day.
We bag everything, load it out, and take it to a licensed transfer station. You get waste transfer notes, before and after photos, and a written statement that the roof void is clear. We aim to hand over the report within 48 hours of finishing on site.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Cuts through closed cell foam in controlled sections without tearing the timber underneath. Used on every closed cell job.
Gets into corners, around rafters and along wall plates where a saw cannot reach. Essential for a clean finish.
Clears foam residue from timber without water or chemicals. The cleanest finish we can give a rafter.
Keeps dust and spores contained in the work area. Runs for the whole job, not just the noisy parts.
Maps damp zones and foam coverage before we cut, so we know exactly what we are dealing with.
Picks up fine foam dust and debris at the end of each stage. Leaves the loft clean enough to walk through.
A three-bedroom bungalow in Roundswell had open cell foam sprayed across the entire roof void. The buyer's lender refused to lend until it was removed, and the sale had already been delayed twice.
We surveyed on a Tuesday, started the following Monday and finished extraction in two days. Timber clean-up took half a day. The post-removal report with photos and moisture readings went to the lender within 48 hours and the sale completed three weeks later.
A Victorian terrace in Newport had closed cell foam bonded to sarking boards. Damp patches had appeared on the upstairs ceiling and the homeowner could smell mustiness in the back bedroom.
We mapped the damp with a thermal camera, cut the foam out in sections over three days and dry ice blasted the sarking clean. Moisture readings dropped from 28 percent to 14 percent within a fortnight. The ceiling dried out completely.
A commercial unit in Barnstaple Town Centre had foam across a 200 square metre roof. The owner needed it gone for a building survey but could not close the business during the week.
We worked two evenings and a Saturday, completing extraction and clean-up in four working days. The survey passed, the lease was renewed and the tenant never lost a trading day. Full waste transfer notes were provided.
Spray foam does not fail quietly. By the time most people call us, there is already a surveyor's report, a damp patch or a lender's letter on the table. Here are the problems we fix most often.
Ask a pro →We remove the foam, clean the timber and provide a report with photos and moisture readings that lenders and valuers accept. Most Barnstaple sales complete within four to six weeks of extraction.
We use a moisture meter to map damp zones before cutting, remove foam in sections so the timber can dry, and flag any rot we find. Dry ice blasting clears residue without adding water to the timber.
Removing the foam restores the roof's ability to breathe. We check ventilation gaps while we are up there and tell you if extra vents or breathable membrane are needed.
Once the old foam is out, the roof void is ready for mineral wool or modern breathable insulation. We leave the timber clean so your chosen installer can start straight away.
Most domestic loft removals in Barnstaple run between 1,200 and 3,500 pounds in 2026, depending on foam type and roof size. Closed cell foam costs more to remove than open cell because it is denser and slower to cut. Commercial roofs and full-house jobs start higher. We give you a fixed price after the survey, so you know the number before we start.
Yes. We cover Barnstaple and the whole of North Devon, including Bideford, Ilfracombe, South Molton, Fremington and Instow. Our team is based locally, so we can usually survey within three to five working days and start work the following week. There is no travel surcharge for any of the Barnstaple neighbourhoods or the surrounding villages.
Three things: containment, separation and documentation. We contain dust with air scrubbers and negative air machines, separate foam and timber for recycling or energy recovery, and give you waste transfer notes so you can see where everything went. We also avoid chemical strippers, using dry ice blasting or sand blasting instead, which keeps residue out of the timber and the air.
A standard 40 square metre loft takes one to two days for extraction, plus half a day for timber clean-up. Larger roofs with closed cell foam can take three to four days. From your first call to the final report, most jobs are done inside two weeks. We confirm the schedule in writing before we start so you can plan around it.
Spray Foam Removal near meIf you are searching for spray foam removal near me in Barnstaple, we cover the whole town and surrounding villages. Same team, same equipment, same fixed-price approach as our environmentally friendly insulation removal service.Explore →
Same day Spray Foam RemovalWhen a surveyor is booked or a sale is hanging on a report, we can often fit in a same day spray foam removal survey in Barnstaple. Call before 10am and we will tell you honestly whether we can get to you that day.Explore →
24/7 Spray Foam RemovalFor commercial clients and emergency situations, our 24/7 spray foam removal line is open around the clock. We handle water ingress, storm damage and urgent lender deadlines across Barnstaple and North Devon.Explore →
Residential Spray Foam RemovalMost of our work is residential spray foam removal in Barnstaple lofts, bungalows and terraced houses. We protect your home, contain the dust and leave the roof void clean enough for any surveyor to inspect.Explore →
Commercial Spray Foam RemovalWe handle commercial spray foam removal for Barnstaple warehouses, workshops and retail units. Out-of-hours working available so your business stays open. Full waste documentation and method statements provided.Explore →
Loft Spray Foam RemovalLoft spray foam removal in Barnstaple is our most common job. We cut out open and closed cell foam, clean the rafters and leave the loft ready for new insulation or a clean survey report.Explore →
Roof Spray Foam RemovalRoof spray foam removal in Barnstaple often means working at height on slate and tile roofs. We assess the roof structure first, then remove foam in sections to avoid overloading the timber.Explore →
Attic Spray Foam RemovalAttic spray foam removal in Barnstaple covers older properties where foam was applied directly to the rafters. We clear it, check for timber rot and give you a moisture report before we leave.Explore →Fixed price, full waste documentation and a roof void your surveyor will pass. Call Union Trust Spray Foam on 0127 159 4024 and we will book your survey, usually within three to five working days.
Book a Survey 0127 159 4024 →Ring us on 0127 159 4024 or email info@uniontrustsprayfoam.com and we will get back to you the same working day. We are open Monday to Friday, 8am to 6pm, with a 24/7 line for emergencies. Free assessments across Barnstaple and North Devon.